Brother 820NWB Printer Setup - Windows

The following instructions will assist you in setting up the Brother QL-820NWB printer driver for your Windows computer to use with the Family Check-In feature in ChurchTrac.

Before you download the driver below, make sure you go through the settings on the 820NWB to connect to your local wireless network.

Please use the link below to download your specific printer driver:

Brother 820NWB Driver

Step 1

The device you are using will automatically be recognized and you will be prompted to download the correct driver for your device. On the next screen, choose the Printer Driver installation.

Step 2

Once the installation has started, you will want to choose the QL-820NWB from the list of devices to install.

Step 3

You will then want to choose the Wireless Network Connection with Peer-to-Peer to install the printer to work wirelessly.

Step 4

Choose the printer from the list of local devices available, and this will be the last step for installing the printer onto the network and your device.

Step 5

Now that the printer has been added to your computer, you will need to navigate to the Brother Printing Preferences screen from the Windows Settings section.

Choose the correct paper size(either 2.4" or 2.4"x3.9" depending upon your label roll) and click 'Apply'.

Once your printer has been added with the steps above, you are all set to go with printing your labels. Please refer to our Using Check-in article for how to get started!